Product Description:

The MDD093A-N-040-N2L-110PL2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed as a drive element for digital motion controllers, the unit converts electrical commands into precise rotary motion for positioning and velocity control in automated industrial production cells. The motor uses a single shaft end on side A, with no shaft extension on side B. Its compact layout suits multi-axis machinery where accurate starts, stops, and speed changes are required during repeated operation.

A continuous standstill torque of 9.2 Nm shows how much force the motor can hold without rotation while energized, which is useful for static loads. Its nominal operating speed of 4000 rpm indicates the rated shaft velocity for fast traverse moves. When power is removed, the integrated brake applies 22 Nm of torque to secure the axis. Position feedback is provided through digital servo feedback, allowing the controller to monitor rotor angle with high resolution. A centering diameter of 110 mm aligns the flange with mounting surfaces, and the plug-in connector interface simplifies electrical installation. The power and signal plugs are oriented on the left side of the housing, which helps with cable routing in layouts that run from right to left.

The rotor uses standard balancing, so no additional correction weights are required during coupling to gearboxes or pulleys. A keyway shaft supports torque transmission with keyed hubs, and a shaft seal helps keep lubricants and dust away from the bearing cavity when the motor is installed in an enclosure. The housing follows the standard enclosure style of the series, and the motor length code A with frame size 093 keeps the mounting footprint consistent without changing baseplate drilling patterns. Overhung loads are carried on the drive end because the motor does not have a second shaft extension.