Product Description:

The MDD093A-N-040-N2L-110PL1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat and supplied within the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts electrical commands into controlled mechanical motion for automated equipment such as pick-and-place modules, feeders, and indexing stations. It supports closed-loop motion on automated axes that require repeatable positioning, quick response, and stable speed regulation during frequent start-stop cycles. The moderate frame size lets it fit machinery where installation space is limited but precise servo performance is still required.

Its nominal speed reaches 4000 rpm, enabling high surface velocities in indexing tables or packaging lines. At standstill, the rotor can deliver a continuous torque of 9.2 Nm, so the motor can maintain force under rated current without excessive heating. An integrated blocking brake supplies 11 Nm of static torque to secure vertical loads when the controller is disabled. Accurate alignment to gearboxes or direct-drive mounts is helped by the centering diameter of 110 mm. Power and feedback conductors enter from the left through a top-mounted connector, which can simplify cable routing where overhead cable paths or limited side clearance are part of the machine layout.

Dynamic control loops depend on the integrated Digital servo feedback, which returns position data to the drive for speed and position regulation. The rotor uses standard balancing, and the housing follows the standard version, so vibration behavior remains consistent through the compact size code 093 and short motor length A. Torque is transmitted through a shaft with a keyway, allowing positive mechanical coupling to pulleys, pinions, or gear inputs. A dedicated shaft seal helps limit the entry of dust or the escape of lubricant at the output end. The design omits a side B shaft end, leaving a single drive end that suits compact machine assemblies and keeps the motor layout straightforward.