Product Description:

The MDD093A-N-040-N2L-110PL0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. It is intended for use with digital drive controllers where rapid positioning, velocity regulation, and repeatable cycle times are required on packaging lines, pick-and-place modules, and other automated equipment. Its synchronous design supports accurate motion response during frequent starts, stops, and speed changes in automated systems.

This motor can deliver a continuous standstill torque of 9.2 Nm, allowing it to hold or slowly move loads without overheating when airflow is limited. At its rated voltage and excitation, it reaches a nominal speed of 4000 rpm, giving machine builders headroom for high throughput with tight process control. Position data is returned through digital servo feedback (DSF), so the connected drive receives rotor position for closed-loop commutation and stable speed regulation. A centering diameter of 110 mm provides a precise pilot fit on gearboxes or mounting flanges, while the shaft uses a keyway to transmit torque directly into couplings or pulleys without slip.

The electrical power and feedback connectors are positioned on the left side of the housing, an orientation that can simplify cable routing in cabinets where drives are stacked vertically. A sealed connector interface supports secure cable attachment and helps keep contaminants away from the contacts. The front end of the shaft uses a shaft seal, which helps prevent lubricants from migrating toward internal components in oily environments. The motor is built without a blocking brake, so holding force must come from the servo drive. Standard balancing, housing, and shaft-end configurations, combined with the A length code, keep the overall envelope compact for installations with limited mounting space.