Product Description:

The MDD093A-N-040-N2L-110PB1 is a servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Classified for use with digital drive controllers, it converts commanded current into regulated rotary motion for positioning axes and speed-controlled machine functions. This operating role suits automated equipment such as handling systems, indexing units, and packaging machinery that rely on closed-loop motion. The unit uses motor size 093 with the compact A length code, which helps it fit multi-axis machinery where installation space is limited. It is intended for applications that need accurate motion without a large motor envelope.

The motor provides a continuous standstill torque of 9.2 Nm, so the axis can hold a static load while energized. Its nominal speed is 4000 rpm, giving the drive a high rated operating speed for synchronous control. An integrated blocking brake supplies 11 Nm of holding torque to secure the shaft when power is removed. Power and feedback conductors exit through a sealed connector on Side B, which helps with cable routing and reduces bending stress near the housing. Standard balancing of the rotor and shaft helps limit vibration during high-speed operation. This cable outlet arrangement is also useful where space around the rear of the motor is restricted.

Mechanical alignment is supported by a centering collar with a diameter of 110 mm, which helps maintain concentric mounting to adjacent machine parts. Position data is provided through Digital servo feedback, allowing the drive to monitor rotor position without an external encoder assembly. The drive end uses a keyway shaft with a shaft seal, which supports keyed couplings while limiting lubricant migration into the mounting area. The housing uses the standard thermal design for heat transfer through the motor body during operation. The shaft extension on side B is omitted, which keeps the package depth short and leaves more room for surrounding machine components.