Product Description:

The MDD093A-N-040-N2L-110PA2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where it acts as the rotary element that follows commanded speed and position changes from a compatible inverter. By combining permanent-magnet excitation with electronic commutation, the motor delivers repeatable torque for pick-and-place stations, gantry axes, and other material-handling equipment. Because commutation is handled electronically, the motor can support precise reversals and stable motion response during frequent starts, stops, and indexing moves.

At standstill, the rotor can deliver 9.2 Nm of continuous torque, which is enough to hold moderate loads without overheating under normal operating conditions. When energized through the onboard connector on Side A of the housing, the motor reaches a rated mechanical speed of 4000 rpm. Rotor position is returned to the drive through digital servo feedback (DSF), allowing accurate closed-loop control and reduced following error. The 093 frame size and compact A length help shorten the installation depth, and the motor is supplied without rear-side shaft machining. Feedback and power connections are grouped at the housing connection point, which helps keep cable routing orderly in compact machine layouts.

A blocking brake is integrated for emergency stops, and it can provide 22 Nm of static torque to secure vertical or suspended loads. Coupling alignment is supported by a centering diameter of 110 mm, and the output shaft uses a keyway so mating components can be mounted securely. The motor has a standard housing, and the built-in shaft seal helps reduce the entry of coolant splash and shop debris. Because the shaft on side B is omitted, the housing can be placed closer to gearboxes or belt-driven components where rear clearance is limited.