MDD093A-N-040-N2L-110GB1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD093A-N-040-N2L-110GB1 is part of the MDD Synchronous Motors series and is designed for digital drive controllers. It provides a continuous torque at standstill of 9.2 Nm, features digital servo feedback, and has a nominal speed of 4000 rpm. The motor includes a blocking brake with a holding brake torque of 11 Nm and uses a standard housing with a 110 mm centering diameter.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093A-N-040-N2L-110GB1 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Targeted for integration with digital drive controllers, the unit converts commanded current into precise rotary motion for positioning, feed, or transport axes across automated equipment. The housing matches the 093 frame class, so it fits mounting spaces intended for that size. Its synchronous design allows the drive system to maintain accurate speed and position tracking under varying load conditions. It is suited for motion systems that require repeatable rotary output during indexing, material transfer, and other controlled machine movements.
At standstill the motor can deliver 9.2 Nm of continuous torque, allowing it to hold load during dwell periods without excessive heating. Under rated conditions the rotor reaches a nominal speed of 4000 rpm, providing fast cycle capability in high-throughput equipment. An integrated blocking brake supplies up to 11 Nm of static holding torque so suspended or vertical axes remain in place after power is removed. Power and feedback leads exit on side B of the frame, which can simplify cable routing in cabinets installed behind the machine. This arrangement keeps the connection points concentrated at one end of the housing. The centering pilot has a diameter of 110 mm for accurate alignment on the mounting face, and torque is transmitted through a plain shaft suited for compression couplings or shrink discs. The electrical interface uses a single circular connector.
The rotor is balanced to standard balance grade, which helps limit residual vibration at the driven load. Position control is closed through the integrated digital servo feedback (DSF) system, which provides high-resolution signals for the velocity and position loops. This feedback arrangement lets the connected drive monitor rotor position continuously during acceleration, deceleration, and holding operation. A fitted shaft seal helps protect the internal bearings from coolant splash and fine dust. The motor uses the A length code, which keeps the stack short and reduces installation depth where axial space is limited. The shorter stack can help when surrounding machine parts leave limited clearance behind the mounting face.
Frequently Asked Questions about MDD093A-N-040-N2L-110GB1:
Q: What is the continuous standstill torque of the MDD093A-N-040-N2L-110GB1 motor?
A: The MDD093A-N-040-N2L-110GB1 provides a continuous torque at standstill of 9.2 Nm.
Q: Does the MDD093A-N-040-N2L-110GB1 motor include a holding brake?
A: This motor includes a blocking brake with a holding torque of 11 Nm.
Q: What type of motor feedback does the MDD093A-N-040-N2L-110GB1 use?
A: Digital servo feedback (DSF) is used for motor position monitoring in this model.
Q: What shaft configuration does the MDD093A-N-040-N2L-110GB1 have?
A: The shaft type on the MDD093A-N-040-N2L-110GB1 is a plain shaft with a shaft seal.
Q: What is the nominal speed of the MDD093A-N-040-N2L-110GB1 motor?
A: The nominal speed for this motor is rated at 4000 min⁻¹.
