Product Description:

The MDD093A-N-040-N2L-110GA2 is a synchronous servo motor built by Bosch Rexroth Indramat and positioned within the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts commanded current from a servo amplifier into precise mechanical rotation for automated machinery. In assembly lines, pick-and-place modules, and packaging stations, the unit provides compact rotary actuation that can be synchronized closely with drive feedback and motion-control algorithms. Its compact form helps it fit machinery that needs responsive axis control without using a large motor envelope.

The centering pilot on the front flange measures 110 mm, allowing accurate seating in standard mounting interfaces while the rotor and hub use a standard balancing grade to limit vibration during high-speed operation. At its rated operating point, the motor can deliver a continuous standstill torque of 9.2 Nm, and it reaches a nominal speed of 4000 rpm when used with the proper power module. Position and velocity are controlled through integrated digital servo feedback (DSF), allowing the drive to monitor motion continuously during acceleration, steady running, and stopping. Power, signal, and brake lines exit on Side A, which helps keep cable routing consistent when all terminations need to face the same direction inside the machine.

The motor uses the standard housing outline with length code A, giving it a compact body that still accommodates an integrated blocking brake. That brake supplies 22 Nm of holding torque, so the axis can remain fixed when power is removed or when a vertical load must be held at rest. Electrical power and feedback signals are routed through a keyed connector, and a shaft seal helps keep coolant or dust away from the bearing area. The 093 frame uses a hardened steel output with a plain shaft end and no shaft extension on side B, matching common coupling hubs used with belt pulleys and planetary gearboxes.