Product Description:

The MDD093A-N-030-N9N-110GS0/S047 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts precisely metered current into rotary motion that supports coordinated axis control in machining centers, automated packaging lines, and material-handling systems. By integrating with closed-loop inverters, the unit supplies repeatable torque and velocity so that tooling, conveyors, or pick-and-place heads follow programmed motion profiles with stable response during acceleration, deceleration, and steady-speed operation.

The motor can sustain a continuous holding torque of 9.2 Nm, allowing stable standstill forces during clamping or indexing phases. A centering diameter of 110 mm provides the reference fit that aligns the stator housing to machine frames and helps maintain accurate shaft positioning. Its nominal operating velocity is 3000 rpm, matching common controller output ranges used for rapid cycle tasks. Because the unit is supplied without a blocking brake, any power-off position retention must be handled by the drive or by an external mechanical lock. Frame size 093 corresponds to this motor’s place in the series and is associated with its mounting pattern and heat dissipation capability.

The rotor uses a standard balancing grade so vibration remains low across the speed range. Compact version code A indicates the shortest active length in this frame size, which helps save axial space where machine depth is limited. A plain shaft is provided for clamp or keyless couplings in applications where low backlash is important. The output end uses a shaft seal to help block lubricant migration and protect the bearings from dust or coolant spray. This layout supports clean integration into enclosed machine assemblies where stable alignment and consistent rotary motion are required over repeated operating cycles.