Product Description:

The MDD093A-N-030-N2M-130PR1 is a synchronous servo motor from Bosch Rexroth Indramat in the MDD Synchronous Motors series. Designed for digital drive controllers, it delivers regulated torque and speed for positioning axes, transfer units, and automated handling equipment. Its integrated feedback package and sealed frame allow direct machine mounting, which helps keep the installation compact and protects internal components during normal industrial use. This arrangement supports closed-loop motion tasks in machinery that requires stable response during starting, stopping, and repeated directional changes.

At the mechanical interface, the motor uses a centering diameter of 130 mm for precise alignment to gearboxes or mounting flanges. Power and feedback leave through a connector on the right side, which helps simplify cable routing when several drive components are installed next to each other. A continuous standstill torque of 9.2 Nm allows the rotor to hold load while current remains within thermal limits. During motion, the shaft reaches a nominal speed of 3000 rpm, supporting fast operating cycles in the 093 frame size. Digital servo feedback (DSF) supplies high-resolution position data to the controller for smooth low-speed operation, while standard dynamic balancing helps reduce vibration and the A length code indicates a short housing for this motor size.

For load holding, the blocking brake supplies 11 Nm of static torque to lock the shaft when power is removed. Position memory is provided by an integrated multiturn absolute encoder, allowing the axis to resume operation without a homing cycle after shutdown. The output shaft uses a keyway for positive torque transmission and includes a shaft seal that helps keep dust or coolant away from the bearings. The motor also has a single-ended shaft with no side B extension, so direct coupling to gears, pulleys, or similar machine elements remains straightforward.