Product Description:

The MDD093A-N-030-N2M-130PB2 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts commanded current into mechanical motion for axes that require accurate position and speed control in automated assembly cells, packaging lines, and material-handling stations. The unit couples directly to the load, allowing the drive to perform closed-loop acceleration, deceleration, and holding functions without separate gearing or hydraulic components.

Its performance envelope begins with a continuous standstill torque of 9.2 Nm, delivered consistently when the winding current is maintained by the controller. Under rated excitation, the motor reaches a synchronous speed of 3000 rpm, matching applications that demand moderate linear velocities from rotary conversion. Radial alignment to adjacent mechanics is simplified by the 130 mm centering diameter, and standard balancing reduces vibration at full speed. Power, feedback, and brake leads exit on the rear because the connection hardware is positioned on side B and terminated through a connector plug set. A blocking brake is integrated, and at rest it can restrain shafts with up to 22 Nm of static torque to prevent drift during power-off intervals. The motor uses a standard housing and the compact length code A, helping machine layouts fit within limited installation depth.

Position data is returned to the drive through digital servo feedback (DSF), and multi-turn resolution is provided by the integrated multi-turn absolute encoder, allowing immediate homing after power restoration. The single-ended shaft carries a keyway for torque transfer and is protected by a shaft seal that limits particle or fluid ingress. The opposite face is left without a secondary shaft end to conserve space. Motor size 093 is the frame dimension used across this series.