Product Description:

The MDD093A-N-030-N2M-130PA0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat and used in the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it works with compatible inverters to deliver closed-loop torque and speed in automated machinery. The motor has size 093 and length code A, which gives it a compact format for medium-duty axes in packaging equipment, material-handling systems, and other controlled-motion applications.

A centering diameter of 130 mm aligns the motor flange accurately on machine frames and coupling surfaces. Power and feedback conductors exit on Side A, and a sealed connector set supports straightforward cable routing without opening the housing. Continuous stall torque is rated at 9.2 Nm, so the motor can provide stable holding force during low-speed positioning and controlled standstill. Under command, the rotor reaches a nominal speed of 3000 rpm, which suits many standard servo drive operating ranges. Standard dynamic balancing helps limit vibration during operation, and the housing can be installed where cabinet airflow or external airflow is available.

Position data is returned through Digital servo feedback (DSF) together with an integrated multi-turn absolute encoder, allowing the controller to retain absolute position information over multiple revolutions. The output shaft uses a keyway and includes a shaft seal to help reduce the entry of oil or coolant along the shaft journal. A standard shaft end is provided only on side A, with no extension on side B, which simplifies direct coupling layouts. For safety, the motor is supplied without a blocking brake, so static holding torque must be provided by the drive or by an external clamping device. This arrangement is suitable for axes where holding is managed electrically or by separate machine hardware.