Product Description:

The MDD093A-N-030-N2M-130GR2 is a synchronous servo motor built by Bosch Rexroth Indramat and supplied in the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where commanded current is converted into controlled rotary motion for positioning tasks and speed-regulated axes. The motor combines an output shaft, encoder feedback, and a brake in one housing, so it can move the load, report rotor position, and help hold the axis at a stop without separate external devices. This layout is suitable for packaging machines, transfer systems, robotic handling cells, and other automated equipment that depends on closed-loop motion control.

At standstill, the motor can deliver a continuous torque of 9.2 Nm, which indicates the load it can support thermally without added cooling. For power-off holding, the integrated brake provides 22 Nm of torque to resist back-driving. Rated mechanical speed reaches 3000 rpm, supporting high-speed servo operation on general automation axes. Installation uses a centering pilot diameter of 130 mm, which helps align the motor with compatible flange interfaces. Electrical power and feedback connections use a right-side connector orientation, which sets the cable exit direction for machine layout. Torque is transferred through a plain shaft that fits suitable clamping or keyed couplings.

Position feedback is provided by digital servo feedback, supplying high-resolution rotor data to the controller for accurate command tracking during rapid moves. A rotating shaft seal protects the encoder area and helps the housing maintain an IP65 enclosure level against dust and low-pressure water exposure. Internal rotating parts use standard balancing, which keeps vibration at a level suitable for precision couplings and normal bearing loading during operation. The controller receives position signals directly from the motor, so no separate external transducer is required for closed-loop use.