MDD093A-N-030-N2M-130GR1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD093A-N-030-N2M-130GR1 is part of the MDD Synchronous Motors series and features a nominal speed of 3000 rpm with a continuous torque at standstill of 9.2 Nm. This motor is equipped with a plain shaft and shaft seal, an integrated multiturn absolute encoder, and a blocking brake with a holding brake torque of 11 Nm. It is intended for use with digital drive controllers and has a standard housing and balancing.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093A-N-030-N2M-130GR1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat and included in the MDD Synchronous Motors series. Intended for pairing with digital drive controllers, it converts controlled electrical energy into precise rotary motion for positioning and speed control on automated assembly lines, packaging systems, and material-handling axes. It is a motor for digital drive controllers and combines a permanent-magnet rotor with integrated feedback electronics so the drive can close its control loops without external transducers.
At stall, the motor can hold a load continuously with 9.2 Nm of torque while remaining within its thermal limits. Under rated excitation, it reaches a rated speed of 3000 rpm. A blocking brake provides 11 Nm of holding torque so vertical or suspended axes remain locked when power is removed. Precise flange alignment is supported by the 130 mm centering diameter, which helps seat the motor accurately in the mating surface. Rotor position is reported through digital servo feedback (DSF), allowing the controller to regulate current and velocity in real time. The motor also uses length code A, size 093, a standard housing, standard balancing, and an integrated multi-turn absolute encoder that tracks multiple revolutions without battery backup.
Cabling exits on the right side, which can simplify routing when the motor is mounted close to adjacent equipment. A plug-in connector interface allows the power and feedback leads to be disconnected without disturbing the full harness layout. Contaminant ingress at the output journal is resisted by a factory-installed shaft seal. The drive end uses a plain shaft without a side-B extension, which eases connection to couplings or pulleys while minimizing overhung mass. This layout also supports compact installation where available clearance around the motor body is limited.
Frequently Asked Questions about MDD093A-N-030-N2M-130GR1:
Q: What type of encoder is included in the MDD093A-N-030-N2M-130GR1 motor?
A: The MDD093A-N-030-N2M-130GR1 motor is fitted with an integrated multiturn absolute encoder.
Q: What is the continuous torque at standstill for the MDD093A-N-030-N2M-130GR1?
A: This model offers a continuous torque of 9.2 Nm at standstill.
Q: Does the MDD093A-N-030-N2M-130GR1 motor come with a holding brake and what is its torque?
A: A blocking brake with a holding torque of 11 Nm is included.
Q: What is the nominal speed of the MDD093A-N-030-N2M-130GR1 motor?
A: The MDD093A-N-030-N2M-130GR1 has a nominal speed rating of 3000 min⁻¹.
Q: What type of motor feedback does the MDD093A-N-030-N2M-130GR1 utilize?
A: This motor uses digital servo feedback (DSF) for motor feedback functionality.
