Product Description:

The MDD093A-N-030-N2M-130GL2 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is supplied as a motor for digital drive controllers, allowing closed-loop motion axes to accelerate and decelerate precisely in automated machinery and material-handling systems where repeatable positioning is required. An integrated multi-turn absolute encoder returns position data even after power loss, so the drive can retain axis position information without a separate external feedback device.

This model can sustain 9.2 Nm of continuous torque at standstill, so it can hold static loads without overheating when the shaft is locked. Under rated excitation, the rotor reaches a nominal speed of 3000 rpm, matching drive controllers configured for high-cycle positioning tasks. A centering diameter of 130 mm aligns the flange concentrically with adjacent mechanical frames, and the connections emerge on the left side so cables can be routed away from moving parts. Power, feedback, and brake leads terminate in a removable connector, which keeps the electrical interface compact at the motor housing. Rotor balance is specified as standard grade, and the housing uses the standard enclosure style for this motor line while the compact length code A keeps overall depth to a minimum.

For axis safety, the motor incorporates a blocking brake that supplies 22 Nm of holding torque when the control system is disabled. The output shaft is a plain shaft with no secondary drive end, making it suitable for couplings or pulleys that clamp directly to the primary journal, and a shaft seal is fitted to limit dust or coolant ingress during washdown cycles. Feedback signals are transmitted as digital servo feedback (DSF), ensuring direct compatibility with Indramat digital drives and eliminating the need for a separate signal converter. The motor also uses frame size 093 and a standard housing finish.