Product Description:

The MDD093A-N-030-N2M-130GL1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Classified for use with digital drive controllers, it converts commanded current into controlled rotary motion for positioning and velocity control on automated machinery. The A-length housing limits overall depth, and a built-in blocking brake secures the load whenever control power is removed. This motor is suited for feed axes, indexing tables, and transfer mechanisms where compact depth and dependable holding are both important. It can be used where accurate starts, stops, and repeatable dwell positions are required across frequent operating cycles.

Its continuous output capability is 9.2 Nm at standstill, indicating the torque that can be delivered indefinitely without exceeding thermal limits. During operation, the rotor can attain a nominal speed of 3000 rpm. Mounting is referenced to a 130 mm centering diameter so the motor seats accurately against machine frames for concentric alignment. The brake provides 11 Nm of holding torque for axes that must remain fixed when power is removed. The motor uses standard balancing to keep shaft vibration within normal tolerances during high-speed service. A connector interface carries power and feedback signals, and the output is intended for backlash-free clamping couplings.

Closed-loop control is supported by an integrated multiturn absolute encoder that records shaft position across multiple revolutions without external batteries. Positional data are transmitted through digital servo feedback (DSF), giving the drive controller fine incremental resolution for smooth torque production. To protect bearings from coolant or dust ingress, the output side includes a shaft seal. All connectors exit on the left side of the housing, which can simplify cable routing when the machine layout approaches the motor from that direction. The feedback arrangement also supports precise speed regulation at low and moderate shaft speeds, helping the paired drive maintain smooth response during acceleration and settling.