Product Description:

The MDD093A-N-030-N2M-130GL0 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where controlled stator currents are converted into precise rotary motion for pick-and-place systems, packaging machinery, and gantry axes. In automated equipment, this controlled motion allows transfer axes and handling units to follow programmed moves with repeatable timing. The housing follows the standard format used in the series, which helps the motor fit common machine layouts built around this platform.

This model supplies a continuous standstill torque of 9.2 Nm, giving the axis steady holding force when motion has stopped. Its rated speed is 3000 rpm, which supports servo applications that need both positioning accuracy and stable running speed. A centering diameter of 130 mm aligns the motor with compatible mounting pilots on machine plates or gearboxes. The electrical interface uses a sealed connector for a compact connection point. Position information is provided by an integrated multiturn absolute encoder, and the motor is supplied without a blocking brake for systems that hold position through external mechanics or drive-generated torque.

All terminals exit on the left side of the stator housing, which can simplify cable routing where neighboring axes share the same wiring path. This cable orientation can also reduce unnecessary bends in compact assemblies where several motors are mounted close together. The motor uses a plain shaft with a shaft seal to help protect the bearing area from contamination and to limit lubricant migration from coupled components. Feedback is transmitted as digital servo feedback, allowing the connected drive to process commutation and position data through a single feedback system. The drive can also use this signal path for automatic electronic nameplate recognition after startup.