Product Description:

The MDD093A-N-030-N2M-130GB2 is an AC synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended for use with digital drive controllers, allowing it to connect directly to servo amplifiers that issue current-controlled commands. By converting that electrical input into precisely regulated rotary motion, the unit supports fast positioning and coordinated movement in automated assembly stations, pick-and-place gantries, and other CNC machinery. Its mechanical outline follows the common MDD frame, allowing standardized mounting across multi-axis systems.

Under rated conditions, the rotor can reach a nominal speed of 3000 rpm, which suits high-cycle production equipment. At standstill, it can deliver a continuous torque of 9.2 Nm, providing steady load support without thermal overload. A blocking brake is fitted, and its clamping system provides 22 Nm of holding torque to secure vertical or suspended axes during power loss. Position feedback is handled by an integrated multi-turn absolute encoder, while velocity and torque data return to the control loop through digital servo feedback. Standard balancing helps reduce vibration during high-speed operation, and the housing uses the base series configuration without additional cooling ducts or fins.

A centering diameter of 130 mm aligns the motor on precision pilot shoulders, and the frame is identified as size 093 with the short A length code to conserve installation space. Power and feedback leads exit toward the rear because the connections are on side B and use a sealed circular connector. The shaft interface is a plain shaft with a shaft seal, which helps block lubricant leakage and airborne contaminants. The motor uses a single-ended shaft design, so there is no secondary shaft on the rear face, and this keeps the overall housing compact.