Product Description:

The MDD093A-N-030-N2M-130GB0 is a synchronous servo motor built by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It uses motor size 093 with the compact A length code, and its rotor is balanced to a standard grade to minimize vibration when paired with digital drive controllers. A molded connector on the rear supplies power and signal lines, while a standard housing and a single-ended shaft arrangement suit general-purpose machine axes in automated production cells. This configuration is well suited to feed axes, indexing stations, and other positioning duties that require stable speed and repeatable motion.

At standstill, the motor can deliver 9.2 Nm of continuous torque without exceeding thermal limits. During operation, it reaches a nominal speed of 3000 rpm, matching typical inverter outputs for rapid and precise positioning. Alignment during mounting is guided by a centering diameter of 130 mm, which helps maintain concentricity with mechanical frames and reduce runout. Position and velocity data leave the unit through digital servo feedback signals, allowing the controller to close the loop at high resolution. The power and feedback conductors are routed toward the rear because the connections are on side B, which can simplify cable layouts when access is taken from the opposite face.

An integrated multi-turn absolute encoder records complete revolutions, eliminating homing cycles after power loss. The motor has a plain shaft, so the coupling must provide its own locking feature. A shaft seal is fitted at the output end to help keep lubricant and contaminants separated. The motor is supplied without a blocking brake, so vertical axes must secure load forces externally when power is removed. The standard housing and rear connector keep the motor body straightforward for enclosed machine installations.