Product Description:

The MDD093A-N-030-N2M-130GA0 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It serves as a drive element for digital motion systems, supplying regulated mechanical power to automated axes used in packaging equipment, pick-and-place gantries, and other precision assemblies connected to digital drive controllers. In these systems, the motor converts commanded electrical input into controlled shaft rotation for accurate speed regulation and positioning. This makes it suitable for repeatable machine cycles where stable motion and coordinated axis response are required.

This motor can deliver a continuous stall torque of 9.2 Nm, meaning it sustains that load indefinitely without overheating when the rotor is locked. During normal operation, it reaches a nominal velocity of 3000 rpm, a speed that matches common inverter output ranges for mid-range positioning tasks. Installation accuracy is assisted by a centering collar that measures 130 mm in diameter, helping the stator seat concentrically inside machine frames. A protective shaft seal is fitted to keep lubricant inside the bearing cavity and to reduce the entry of dust or coolant into the housing. Because the unit is supplied without a blocking brake, external holding force or drive-controlled torque must be used when the application requires the shaft to remain fixed at standstill.

Electrical terminations are routed on Side A through a single industrial connector, which helps keep cable routing direct and reduces the space needed around the motor body. Rotor position is monitored by a multiturn absolute encoder, while the drive receives high-resolution signals through digital servo feedback to improve velocity regulation and maintain accurate position tracking over repeated cycles. This feedback arrangement also allows the controller to retain position information through multiple revolutions and support controlled startup behavior after power interruptions. Standard balancing limits vibration, and the plain shaft with a standard end profile simplifies coupling to gearboxes or timing pulleys. The motor follows length code A, so it uses the shortest build size in its family while keeping the compact housing suited to space-limited axis layouts.