Product Description:

The MDD093A-N-030-N2M-110PR0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed for use with digital drive controllers, it converts commanded current into regulated torque and speed for axes that require responsive positioning in assembly lines, tool changers, and material-handling stages. Its compact frame supports installation close to the driven mechanics, and the integrated feedback hardware helps the drive maintain accurate motion control during repeated start-and-stop cycles. The motor is well suited for applications that need fast response without a large installation footprint.

At a nominal speed of 3000 rpm, the rotor supplies a continuous standstill torque of 9.2 Nm, providing predictable holding force during indexing operations. Position data are captured by an integrated multiturn absolute encoder and returned to the controller as digital servo feedback (DSF) for closed-loop regulation. Cables exit on the right, and a molded connector carries both power and signal lines in the same direction. The unit does not include a holding brake, so a stopped load must be secured by drive torque or an external holding device. A shaft seal helps block coolant spray from the front bearing, and the housing supports heat transfer from the laminated core. Rotor mass is balanced to a standard grade to help limit vibration across the working range.

A centering diameter of 110 mm matches common pilot recesses, while the frame designation 093 and compact length code A keep overall depth low for tandem installations. The single-ended shaft has no side B extension and uses a keyway so torque can be transmitted through keyed couplings. This mounting layout helps the motor seat accurately against machine faces and supports consistent coupling alignment. The compact housing also leaves more room for adjacent components in dense axis assemblies.