Product Description:

The MDD093A-N-030-N2M-110PL2 is a synchronous AC servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It works with digital drive controllers to create closed-loop motion axes in industrial machinery. By converting electrical power into controlled rotary torque, the unit supports packaging lines, handling stations, and other automated equipment that depend on precise electromechanical actuation. Its compact motor format suits installations where accurate speed control and repeatable positioning are required within limited machine space.

Its continuous standstill torque rating of 9.2 Nm allows the shaft to resist load forces without overheating when the axis must hold position for long periods. Under rated excitation, the rotor reaches a nominal speed of 3000 rpm, which gives the drive a stable operating point for regulated motion. A built-in blocking brake supplies up to 22 Nm of static holding torque, preventing unintended movement whenever power is removed. Mechanical integration uses a centering diameter of 110 mm, which helps align the flange accurately on the machine frame. For feedback, the motor sends position and velocity data through digital servo feedback, allowing the controller to correct deviations in real time and maintain commanded trajectories.

The connection hardware is mounted on the left side and uses a keyed connector, which helps simplify cable routing inside compact cabinets. Power is transferred through a shaft with a keyway, so couplings can lock to the shaft for slip-resistant torque transmission. An integrated multiturn absolute encoder tracks angular position across power cycles, which removes the need for a homing routine after startup. Standard dynamic balancing helps reduce radial vibration during operation. The standard housing includes a shaft seal that helps limit dust or coolant ingress, and length code A indicates the shortest stator stack in this frame size. The single-ended shaft arrangement leaves the rear section available for the brake assembly.