Product Description:

The MDD093A-N-030-N2M-110PL1 synchronous servo motor is produced by Bosch Rexroth Indramat and belongs to the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it translates current commands from servo amplifiers into controlled rotary motion for axes that require precise positioning in automated assembly, packaging, and material-handling equipment. Its framed construction allows direct mounting inside electrical cabinets or on machine frames, making it a compact rotary actuator for modular drive systems. This layout supports closed-loop motion tasks where stable torque delivery and accurate position response are required throughout repeated machine cycles.

At its rated operating point, the motor sustains a continuous standstill torque of 9.2 Nm, allowing static load holding without overheating. The rotor reaches a nominal speed of 3000 rpm, which suits controllers that supply 200 Hz electrical excitation. To secure the shaft whenever power is removed, the blocking brake provides 11 Nm of torque. Position data are transmitted through an integrated multi-turn absolute encoder and the drive’s Digital servo feedback channel, so absolute position is available immediately after startup. A centering diameter of 110 mm seats the flange against standard pilot recesses for accurate concentric alignment. The assembly also incorporates a shaft seal to restrict oil ingress from connected gear stages.

Balancing is standard to limit residual vibration, and the aluminum housing uses the regular form for this series. With a motor size of 093 and length code A, the unit fits compact drive modules where axial space is limited. Power and feedback cables exit on the left side through a circular connector, which helps keep routing consistent when the motor is mounted against a machine plate. The output uses a keyway shaft for positive coupling to pulleys or couplings, and the design omits a side-B shaft end to reduce overall depth.