MDD093A-N-030-N2M-110PL0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD093A-N-030-N2M-110PL0 is part of the MDD Synchronous Motors series and features a nominal speed of 3000 min⁻¹ with a continuous torque at standstill of 9.2 Nm. The motor has a centering diameter of 110 mm, uses a standard housing with a shaft seal and keyway, and includes an integrated multiturn absolute encoder with digital servo feedback. It is designed for digital drive controllers and utilizes a left-facing connector for its connection type.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093A-N-030-N2M-110PL0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat and supplied in the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where it converts commanded current into controlled rotary motion for automation cells, packaging equipment, and material-handling systems. Its compact housing supports repeatable positioning while fitting machines that use the mounting pattern common to this motor line. This type of motor is commonly used where accurate speed control and stable positioning are required over repeated production cycles.
The motor reaches a nominal speed of 3000 rpm, allowing rapid speed changes while maintaining synchronous operation. At standstill, it can provide a continuous torque of 9.2 Nm, so the axis can sustain load during holding and low-speed motion. Position information is delivered through digital servo feedback (DSF), which gives the controller the data needed for accurate closed-loop regulation. Power and signal connectors are located on the left side of the housing, and the centering diameter of 110 mm supports direct flange alignment. This arrangement can help keep cable routing orderly when several axes are installed close together on the same machine frame.
An integrated multi-turn absolute encoder tracks shaft position across multiple revolutions, so the drive can retain position information after power cycles. The output shaft is supplied with a shaft seal, which helps limit dust entry and lubricant escape in enclosed installations. Torque is transmitted through a keyway shaft end, and the frame size code 093 identifies the motor's basic mechanical envelope. This A-length version helps reduce overall mass where installation space is limited. The motor uses connector termination and comes without a blocking brake.
Frequently Asked Questions about MDD093A-N-030-N2M-110PL0:
Q: What is the continuous torque at standstill for the MDD093A-N-030-N2M-110PL0 motor?
A: The MDD093A-N-030-N2M-110PL0 has a continuous torque of 9.2 Nm at standstill.
Q: What type of encoder does the MDD093A-N-030-N2M-110PL0 motor use?
A: This model is equipped with an integrated multiturn absolute encoder.
Q: What kind of motor feedback is utilized in the MDD093A-N-030-N2M-110PL0?
A: Motor feedback for this unit is provided by digital servo feedback (DSF).
Q: What type of shaft and sealing does the MDD093A-N-030-N2M-110PL0 motor include?
A: The shaft features a keyway design and comes with a shaft seal to help prevent contamination.
Q: Does the MDD093A-N-030-N2M-110PL0 motor have a blocking brake?
A: This motor model does not include a blocking brake.
