Product Description:

The MDD093A-N-030-N2M-110PB1 is a synchronous servo motor produced by Bosch Rexroth Indramat and supplied within the MDD Synchronous Motors series. It is intended for digital drive controllers and converts drive current into controlled mechanical rotation for positioning or velocity loops in industrial automation. A standard housing and standard dynamic balancing help the unit mount directly to machinery with low vibration, while the A-length frame keeps overall depth low where installation space is limited. This makes the motor suitable for compact servo axes in packaging, transfer, and indexing equipment.

This model reaches a nominal speed of 3000 rpm, enabling fast axis cycles in pick-and-place or tooling stations. At standstill it can supply a continuous torque of 9.2 Nm, which is the maximum static load the rotor can hold thermally without extra cooling. A blocking brake rated for 11 Nm is integrated to secure vertical loads during power-off events. Power and feedback conductors exit on Side B through a single connector, which helps keep cable routing orderly inside multi-axis assemblies. Standard class balancing keeps residual shaft forces low at full speed, and the 093 size together with motor length code A gives the motor a compact body.

The front flange has a centering diameter of 110 mm for repeatable alignment to gearboxes or direct-drive mounts. Positional data is returned over Digital servo feedback (DSF), and rotor position is also stored by an integrated multiturn absolute encoder so the axis knows its angle after power restoration. A shaft with a keyway mates with standard couplings, and a shaft seal is fitted to help prevent oil ingress from adjoining gear stages. The motor is delivered without a shaft extension on side B, which reduces overhung mass for inline layouts and keeps the rear profile compact. This shorter rear section can also help when the motor is installed close to guards, brackets, or adjacent machine elements.