Product Description:

The MDD093A-N-030-N2M-110PB0 is a servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed for digital drive controllers, it converts electrical input into controlled rotary motion for packaging, handling, and machining axes. The 093 frame with motor length code A gives the unit a compact form that fits typical industrial enclosures without taking unnecessary space. The motor delivers commanded torque to the load while its integrated feedback device returns position data for closed-loop control during speed and positioning tasks.

In continuous duty at standstill, the motor supplies 9.2 Nm of torque, providing holding force without excessive heat rise. During operation, it reaches a nominal speed of 3000 rpm, which supports fast axis movement in general automation equipment. Position information comes from integrated digital servo feedback (DSF) with a multiturn absolute encoder, so the control system can recognize position after power-up without separate homing sensors. Flange alignment uses a 110 mm centering diameter for repeatable mounting on the machine interface. Torque is transmitted through a shaft with a keyway, which allows secure coupling to pulleys, hubs, or other driven components. The shaft is a standard single-ended design, so there is no extension on side B.

The rotor uses standard balancing, which supports smooth running when the attached tooling is balanced correctly. Electrical connections exit on Side B, and the plug-in connector provides a direct connection point for power and feedback cabling. The motor is supplied without a blocking brake, so loads that must remain fixed at standstill require holding torque from the drive or an external brake. A shaft seal is included to help reduce the ingress of oil and dust into the bearing area. The housing style is standard, which keeps the external form consistent with other motors in the same product line.