MDD093A-N-030-N2M-110GL2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD093A-N-030-N2M-110GL2 is a motor for digital drive controllers, part of the MDD Synchronous Motors series. It delivers a continuous torque at standstill of 9.2 Nm and a holding brake torque of 22 Nm, with an integrated multiturn absolute encoder and digital servo feedback. This model features a standard plain shaft, connector-type left connection, and a centering diameter of 110 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093A-N-030-N2M-110GL2 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts drive current into controlled rotary motion for positioning or velocity tasks in industrial automation such as packaging lines or handling axes. Its standard housing and mechanical interface match other units in the series and support installation on compatible mounting surfaces. When paired with Rexroth drive amplifiers, the motor provides closed-loop motion for regulated machine axes. In industrial use, this supports repeatable motion on indexing tables, feed axes, and other servo-controlled mechanisms.
At standstill, the motor can deliver a continuous torque of 9.2 Nm, providing holding force without overheating. During operation, it reaches a nominal speed of 3000 rpm, supporting common velocity-control applications. A spring-applied holding brake inside the rear housing supplies 22 Nm of static torque to secure vertical loads when power is off. The centering diameter is 110 mm, so the flange seats precisely on a matching pilot register and maintains alignment with driven mechanics. Power, encoder, and brake leads exit on the left side through a single circular connector, simplifying cable routing when multiple axes are mounted in line.
Position accuracy relies on the integrated multiturn absolute encoder, which reports shaft angle and revolution count to the drive through digital servo feedback (DSF). This removes homing moves after power cycles and supports synchronous interpolation across axes. The rotor has a plain shaft, and a factory-installed shaft seal helps prevent lubricant from migrating into the motor interior. The standard shaft end is present only on the drive side, leaving no extension on side B. With no rear shaft extension, the motor can fit more easily where surrounding guards or couplings leave limited space behind the housing. Standard dynamic balancing reduces vibration, while the A length code keeps the body depth short.
Frequently Asked Questions about MDD093A-N-030-N2M-110GL2:
Q: What is the continuous torque at standstill for the MDD093A-N-030-N2M-110GL2 motor?
A: The MDD093A-N-030-N2M-110GL2 has a continuous torque at standstill of 9.2 Nm, ensuring stable force delivery for stationary tasks.
Q: What type of encoder is used in the MDD093A-N-030-N2M-110GL2 motor?
A: This model uses an integrated multiturn absolute encoder for precise and reliable position feedback.
Q: What type of shaft and seal does the MDD093A-N-030-N2M-110GL2 motor have?
A: The shaft on this motor is a plain shaft with a shaft seal, providing reliable mechanical connection and protection against contaminants.
Q: What is the holding brake torque of the MDD093A-N-030-N2M-110GL2?
A: The holding brake on this motor delivers a holding torque of 22 Nm, suitable for maintaining position when not powered.
Q: Where is the electrical connection located on the MDD093A-N-030-N2M-110GL2 motor?
A: This motor features a left-mounted connector for electrical connections, simplifying cable management in installations.
