Product Description:

Bosch Rexroth Indramat manufactures the MDD093A-N-030-N2M-110GL1, an AC synchronous motor in the MDD Synchronous Motors series. The product is intended for integration with digital drive controllers, where it transforms controlled stator current into accurate mechanical rotation for automation equipment. A size-093 frame and an internal multiturn encoder support closed-loop position control on mid-range axes used in material transport, printing, and light machining lines.

The motor delivers a continuous standstill torque of 9.2 Nm, allowing sustained load holding without overheating when the shaft is locked. During motion, it reaches a nominal speed of 3000 rpm, matching standard drive operation in synchronized production cycles. A blocking brake rated at 11 Nm engages when power is removed, helping prevent drift on vertical or suspended loads. Accurate centering against machine flanges is supported by a 110 mm pilot diameter, and the power and feedback plugs exit on the left side so cabinet layouts can route cables in a uniform direction.

Standard dynamic balancing minimizes vibration, while the normal-profile housing promotes airflow around the stator laminations. The motor length is classified as code A, so overall depth is reduced compared with longer variants in the same series. Feedback is supplied by an integrated multiturn absolute encoder that transmits position data through digital servo feedback, eliminating the need for external resolvers. A plain shaft with a standard single-ended configuration simplifies coupling to gearboxes, and a fitted shaft seal blocks coolant or lubricants from migrating along the journal into the bearing cavity. Connection is made through a circular plug-in connector that supports quick cable attachment without disturbing conduit fittings.