Product Description:

The MDD093A-N-030-N2M-110GB1 synchronous motor is manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Designed for digital drive controllers, it converts controlled three-phase power into regulated mechanical torque while supplying position data for closed-loop automation axes. Standard rotor balancing helps limit residual vibration during operation, and the housing is supplied in the normal configuration so it can be mounted inside a cabinet or directly on machinery without extra protective changes. This layout supports precise motion on machine axes that must accelerate, stop, and hold position with consistent response.

A centering pilot of 110 mm forms the flange recess and helps maintain coaxial alignment with gearboxes or couplings. The motor sustains 9.2 Nm of continuous torque at standstill, allowing static load support without thermal overload. Under rated electrical frequency, it runs at a nominal speed of 3000 rpm, giving predictable velocity for indexing or conveying tasks. An internal blocking brake supplies 11 Nm of holding torque so vertical loads remain secured when the inverter is disabled. All power, brake, and feedback connectors exit on Side B, which keeps the connections grouped on one end of the housing and simplifies cable routing when the shaft faces the operator side of a machine frame.

Within the series, the frame code 093 places this model in the medium power range. Position and speed loops rely on an integrated multiturn absolute encoder connected through digital servo feedback, allowing multi-revolution tracking without a battery and giving the drive immediate position information after startup. Torque is transferred through a plain shaft, which suits couplings that clamp directly to the shaft surface. A shaft seal is installed to help prevent coolant or lubricants from entering the front bearing area during washdown or oil-splash operation. The connector-based wiring also keeps electrical termination separate from the rotating output end, which helps maintain clear access around the shaft and coupling.