MDD093A-N-030-N2M-110GA1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911254936
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
35 Seconds
The Bosch Rexroth Indramat MDD093A-N-030-N2M-110GA1 is a motor for digital drive controllers from the MDD Synchronous Motors series, featuring a plain shaft with shaft seal and a centering diameter of 110 mm. It comes with an integrated multiturn absolute encoder, digital servo feedback, and a holding brake torque of 11 Nm. The motor provides a continuous torque at standstill of 9.2 Nm and has a nominal speed of 3000 min⁻¹.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093A-N-030-N2M-110GA1 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it supplies precisely regulated torque and speed to automation axes in packaging, printing, and handling equipment. Its closed-loop operation helps maintain stable motion during acceleration, deceleration, and reversing cycles. A standard housing and shaft seal support use in typical industrial installations, while the shaft connects directly to couplings or gearboxes.
This model uses a centering diameter of 110 mm, making alignment with machine frames straightforward and repeatable. Under continuous stall conditions, it can deliver 9.2 Nm, which is the continuous torque available without exceeding winding thermal limits. The motor reaches a nominal speed of 3000 rpm, which suits applications that need steady mid-range speed. Position information is supplied by an integrated multi-turn absolute encoder, so the controller retains shaft position information after power loss. Power and feedback leads exit on side A through a pluggable connector, which helps keep cabinet cable routing orderly. This layout also keeps the connection area accessible when the motor is installed close to machine frames or guarding. Standard balancing reduces vibration at rated speed, and the A length code indicates the shortest build in the 093 frame.
An electromagnetic holding system provides 11 Nm of brake torque, allowing the motor to hold vertical loads when de-energized. Command loops close through digital servo feedback (DSF), which improves stiffness during rapid reversals and supports accurate response to changing load conditions. The output end uses a plain shaft, which reduces part count compared with keyed versions and eases assembly in coupling hubs. A built-in brake engages automatically when power is removed, so an external clamp is not required to prevent drift. This arrangement is useful on axes that must remain stationary during shutdown or emergency stops.
Frequently Asked Questions about MDD093A-N-030-N2M-110GA1:
Q: What is the continuous torque at standstill for the MDD093A-N-030-N2M-110GA1 motor?
A: This model offers a continuous torque of 9.2 Nm at standstill.
Q: What type of encoder is included in the MDD093A-N-030-N2M-110GA1?
A: The MDD093A-N-030-N2M-110GA1 is equipped with an integrated multiturn absolute encoder.
Q: Does the MDD093A-N-030-N2M-110GA1 feature a holding brake, and what is its braking torque?
A: This motor comes with a blocking brake that provides a holding brake torque of 11 Nm.
Q: What type of shaft and sealing does the MDD093A-N-030-N2M-110GA1 have?
A: The shaft on this model is a plain shaft with a shaft seal for added protection.
Q: Where is the connection port located on the MDD093A-N-030-N2M-110GA1 motor and what connection type does it use?
A: The connection direction for this motor is on Side A, utilizing a connector.
