Product Description:

The MDD093A-N-030-N2L-130PR2 belongs to the MDD Synchronous Motors series manufactured by Bosch Rexroth Indramat. It is intended for digital drive controllers and provides closed-loop rotary motion for packaging stations, material-handling axes, and similar automated equipment. By combining the rotor, stator, and position sensor in one housing, the motor offers a compact actuator that mounts directly to machinery. This type of servo motor is commonly used where the drive must respond quickly to changing load conditions while maintaining repeatable positioning over many cycles.

The centering flange has a diameter of 130 mm, allowing repeatable alignment with machine interfaces that use this pilot size. Power and feedback cables exit on the right-side of the stator, which can simplify routing in tightly packed cabinets. When energized, the motor sustains 9.2 Nm of continuous standstill torque for medium-duty indexing and holding tasks. Position data is returned through digital servo feedback, allowing the controller to correct motion with closed-loop updates during operation. Under rated excitation, the rotor reaches 3000 rpm while maintaining stable speed control. That combination of torque, feedback, and speed suits axes that need accurate stops and short travel times.

An integrated blocking brake can hold up to 22 Nm, helping prevent axis movement when power is removed. The output uses a keyway shaft so hubs, pulleys, or couplings can be secured against slip during torque transfer. Mechanical depth is given by length code A, which indicates the shortest version of the 093 frame and helps keep inertia low. A fitted shaft seal helps keep coolant splash and dust away from the front bearing chamber. This arrangement is useful on vertical or suspended loads where unwanted movement must be limited during shutdown. The motor also uses a standard housing and balancing arrangement suitable for general industrial environments.