Product Description:

The MDD093A-N-030-N2L-130PR0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat and supplied within the MDD Synchronous Motors series. Designed for digital drive controllers, it converts controlled electrical input into precisely regulated mechanical rotation for packaging lines, assembly cells, and other industrial automation axes. The model belongs to motor size 093 with length code A, and it uses standard balancing and housing arrangements so it can be installed without special vibration measures or custom enclosure changes. This layout supports straightforward integration into automated equipment where stable motion and predictable mounting are required.

At standstill, the rotor can deliver 9.2 Nm of continuous torque, giving a clear reference for rated holding force under thermal steady-state conditions. During motion, it can reach a nominal speed of 3000 rpm, which supports rapid cycle positioning on indexing and transfer axes. A centering shoulder diameter of 130 mm aligns the flange accurately on the mounting surface to minimize runout. Power and feedback conductors exit on the right side through a field-replaceable connector, allowing cleaner cable routing around nearby machine components. The ground shaft end is machined with a keyway, so pulleys or couplings can transmit torque without slip.

The motor is supplied without a blocking brake, so systems that need holding force after power removal must use an external brake or maintain drive torque. Rotary position is reported through digital servo feedback, enabling the controller to close high-resolution speed and position loops without a separate external encoder. For contamination control, a shaft seal is fitted at the output end to limit dust and coolant ingress into the bearing cavity. This sealing arrangement helps maintain the motor's IP65 protection in typical industrial service.