Product Description:

The MDD093A-N-030-N2L-130PL2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts commanded current into precise rotational motion for positioning and speed-control tasks in automated machinery. When paired with a compatible drive, the unit provides closed-loop actuation for conveyors, tooling axes, and pick-and-place modules used in industrial automation. This operating role suits applications that require repeatable starts, controlled speed changes, and accurate motion during continuous production cycles.

A nominal speed of 3000 rpm supports rapid cycle times in applications that require quick acceleration and stable operation. At standstill, it can deliver a continuous torque of 9.2 Nm, allowing the motor to maintain holding force without overheating during continuous duty. Position data is returned through digital servo feedback (DSF), which lets the drive monitor rotor position and regulate motion accurately. Installation uses a 130 mm centering diameter that fits standard flange bores. The motor uses standard balancing, and the housing has the standard design used for this series. Size code 093 and length code A identify the motor dimensions, and a molded connector provides the power and feedback interface.

A blocking brake is fitted, and it clamps the shaft with 22 Nm of static holding force when power is removed. Cabling enters on the left side, which can help avoid conflicts with right-hand service access in multi-axis racks. The motor has a single-ended shaft and comes without a side B shaft end. Its shaft profile uses a keyway for conventional keyed couplings. A shaft seal is fitted to help limit dust and fluid ingress at the shaft exit, and the shaft layout supports common coupling hardware.