Product Description:

The MDD093A-N-030-N2L-130PA2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for use with digital drive controllers in automated machinery. As a member of the MDD Synchronous Motors series, it serves axes that require repeatable torque, quick reversals, and high positional accuracy, such as pick-and-place stations, gantry loaders, and light machining spindles. By translating programmed current waveforms into controlled rotation, the motor forms the mechanical interface between the electronic motion command and the driven load.

It develops a continuous standstill torque of 9.2 Nm, allowing the axis to hold a load without overheating while stationary. At rated excitation, it reaches a nominal speed of 3000 rpm, so position loops can execute rapid moves without gear reduction. An integrated blocking brake supplies 22 Nm of static holding torque, keeping vertical loads secure after power removal. Rotor position is returned to the drive through digital servo feedback, which supplies absolute and incremental data for closed-loop control. Mechanical alignment is supported by a centering flange diameter of 130 mm, which helps with coaxial coupling alignment.

The electrical leads are presented on side A through a keyed connector, so cabinet wiring remains orderly when multiple motors sit side by side. Motion power exits the rotor through a shaft with a keyway, and the front bearing region is protected by a shaft seal that limits dust and coolant migration during continuous operation. Standard balancing and a standard housing finish help restrict vibration levels and protect the feedback electronics. Size code 093 and length code A indicate the active magnetic stack and overall body length, while the standard shaft end omits a secondary output on side B, reducing inertia.