Product Description:

The MDD093A-N-030-N2L-130GR2 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed for digital drive controllers, the unit delivers controlled rotary motion for positioning axes, conveyors, and tool-spindle functions in automated machinery. Its construction matches common electrical and mechanical interfaces used in modular drive systems, so it fits established machine layouts without requiring unusual connection arrangements. The motor can be used where smooth low-speed holding and responsive acceleration are both required in one axis package.

A centering diameter of 130 mm locates the motor precisely on the machine frame and helps maintain accurate alignment at the mounting face. Power and feedback conductors leave the housing on the right side, and the factory-installed connector interface keeps cable routing orderly at the motor. The stator can deliver 9.2 Nm of continuous torque while locked, providing steady force for tensioning duties and vertical-axis holding. For secure parking when power is removed, a blocking brake rated at 22 Nm engages automatically and releases through the drive brake circuit. Under rated excitation, the rotor reaches a nominal speed of 3000 rpm, which suits general-purpose servo applications while keeping the motor compact.

Position and velocity are reported by digital servo feedback (DSF), allowing the controller to correct deviation on each operating cycle. The frame size code 093 keeps inertia moderate, which helps the motor respond quickly to acceleration and deceleration commands. A plain shaft provides the mechanical output interface, and it is supplied without a side-B shaft extension. A shaft seal sits behind the output flange to help block coolant entry and retain bearing grease in general-purpose enclosures.