Product Description:

The MDD093A-N-030-N2L-130GL2 is an AC permanent-magnet servo motor manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Designed for use with digital drive controllers, it converts commanded current into controlled torque and speed for packaging lines, transfer stations, and other automated motion axes. It supports repeated positioning cycles where accurate speed control and stable feedback are needed. Its housing follows the standard series envelope, which helps it fit common machine layouts and established drive configurations.

Mechanically, the motor uses a centering diameter of 130 mm, allowing a rigid pilot fit to gearbox flanges and machine mounting faces. Power and feedback conductors exit on the left side because the terminal block and coded connector are oriented in that direction, which can simplify cable routing in side-entry installations. At standstill, the electromagnetic system can generate 9.2 Nm of continuous torque, making it suitable for applications that must hold a steady load without shaft rotation. During operation, it reaches a rated speed of 3000 rpm, matching the velocity range used by many transfer and handling axes. Standard balancing and a standard housing support smooth running and predictable mounting dimensions.

Dynamic performance is supported by an integrated blocking brake that delivers 22 Nm of holding torque, allowing vertical axes to remain fixed when power is removed. Position data is returned through digital servo feedback, so the drive can close high-resolution speed and position loops without an external encoder assembly. The rotor uses a plain shaft with a shaft seal to limit contamination at the bearing area, and the shaft end is supplied in the standard single-ended form. Frame size 093 with the short A length keeps the motor compact while still providing room for standard housing cooling channels. A standard motor feedback connector completes the wiring arrangement.