Product Description:

The MDD093A-N-030-N2L-130GB2 is a synchronous motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It serves as the rotary element for digital drive controllers in automated equipment. It translates regulated current into commanded angular motion for positioning, indexing, or velocity-controlled tasks on packaging lines, assembly stations, and similar production axes.

During operation, the rotor can produce a continuous stall torque of 9.2 Nm, allowing the axis to hold load without thermal overload at zero speed. The motor reaches a nominal speed of 3000 rpm, giving servo loops a practical operating range. A blocking brake is built in and supplies 22 Nm of static locking torque to secure vertical or suspended loads when power is removed. Position data is returned through digital servo feedback (DSF), giving the controller high-resolution information for closed-loop correction. Power, brake, and feedback conductors exit on Side B through a single keyed connector, simplifying cabinet wiring and maintaining a compact motor profile. The shaft is plain, the housing uses standard cast construction, and rotor balancing follows the standard grade to minimize vibration in high-cycle service.

Mounting is facilitated by a centering diameter of 130 mm, which aligns the flange precisely with machine frames. The motor uses size code 093 and length code A, indicating the shortest body in this frame class, which is useful where axial space is limited. Contaminant ingress at the output end is limited by the included shaft seal, and the shaft end is the standard single-sided version, leaving the opposite face free for coolant or encoder cabling. The product type indicates that the motor is intended for digital drive controllers and can be used with compatible Rexroth inverter platforms.