Product Description:

The MDD093A-N-030-N2L-130GB1 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Serving as a motor for digital drive controllers, it converts commanded current into controlled rotary motion for industrial positioning and velocity loops. The unit follows the series' standard housing and standard balancing, so its mechanical fit and mass distribution are consistent with other MDD models. Integrated shaft sealing protects the internal bearings when the motor is mounted near coolant or lubricants on packaging lines, gantry systems, and similar automated equipment.

The motor supplies a continuous stall torque of 9.2 Nm, meaning it can hold that load continuously without overheating when cooling airflow is present. During operation, its windings reach rated frequency at a nominal speed of 3000 rpm, supporting quick indexing for pick-and-place and conveyor axes. A blocking brake built into the end bell resists back-driving with a holding capacity of 11 Nm, so vertical loads remain fixed when power is removed. Motion data are returned to the drive through digital servo feedback, which supports precise position capture and rapid cyclic updates. Power, brake, and feedback leads exit on the mounting face identified as Side B, which can simplify cable routing when multiple motors are installed along the same machine wall.

Mechanical alignment is provided by a 130 mm centering shoulder that mates with pilot bores on gearboxes or mounting flanges. Torque is transferred through a plain shaft, and the standard shaft end keeps the coupling arrangement compact. All electrical terminations are made through a keyed connector that locks against vibration during operation. The frame coded as 093 places the motor in the series' medium-power segment, while motor length code A keeps inertia low for responsive acceleration. This layout suits installations that need accurate servo response without requiring an oversized motor body.