MDD093A-N-030-N2L-130GB0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911253968
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
29 Seconds
The Bosch Rexroth Indramat MDD093A-N-030-N2L-130GB0 belongs to the MDD Synchronous Motors series and is a motor for digital drive controllers. It features a continuous torque at standstill of 9.2 Nm and a nominal speed of 3000 min⁻¹. The motor uses digital servo feedback, comes with a plain shaft and a centering diameter of 130 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093A-N-030-N2L-130GB0 is a synchronous servo motor built by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it supplies rotational power to axes that need closed-loop speed and position control in automated machinery. It pairs directly with compatible Rexroth drive electronics so motion profiles can be executed without external gearing. This type of motor is commonly used on feed axes, indexing units, and other machine functions that require repeatable acceleration and stable regulation under changing loads.
During continuous stall, the motor delivers 9.2 Nm of torque and has a rated shaft speed of 3000 rpm. Feedback is provided through digital servo feedback, allowing the drive to correct position error in real time. Power and encoder cables exit on side B, and a single connector handles both power and signal conductors to simplify wiring. The motor is supplied without a blocking brake, so holding torque must be generated electrically or by an external clamp. Standard dynamic balancing reduces vibration at speed, and the A-length stator helps keep overall mass low where installation space is limited. A cast-aluminum housing also helps dissipate heat from the windings during normal operation.
Mechanical interface features include a centering pilot of 130 mm that aligns the flange to gearboxes or bell housings with minimal radial runout. The drive shaft is a plain shaft with no secondary output on the opposite end, which reduces overhung load and keeps the shaft arrangement simple. A shaft seal helps prevent lubricant migration and blocks airborne contaminants from entering the bearing chamber. The frame code 093 indicates the stator diameter, giving the motor a power density suited to medium-inertia loads such as indexing tables and packaging rollers while retaining compatibility with the established MDD mounting footprint. This layout is suitable for couplings and gearbox interfaces that need accurate flange alignment and protection at the shaft opening.
Frequently Asked Questions about MDD093A-N-030-N2L-130GB0:
Q: What is the nominal speed of the MDD093A-N-030-N2L-130GB0 motor?
A: The MDD093A-N-030-N2L-130GB0 has a nominal speed of 3000 min⁻¹.
Q: What is the continuous torque at standstill for the MDD093A-N-030-N2L-130GB0?
A: This model provides a continuous torque of 9.2 Nm at standstill.
Q: What kind of motor feedback does the MDD093A-N-030-N2L-130GB0 offer?
A: This motor uses digital servo feedback (DSF) for precise position and speed monitoring.
Q: What type of shaft and sealing does the MDD093A-N-030-N2L-130GB0 feature?
A: The shaft is a plain type and includes a shaft seal for added protection.
Q: What is the connection direction and type for the MDD093A-N-030-N2L-130GB0 motor?
A: The electrical connection is located on side B and uses a connector interface.
