MDD093A-N-030-N2L-130GA2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911257069
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
13 Seconds
The Bosch Rexroth Indramat MDD093A-N-030-N2L-130GA2 is part of the MDD Synchronous Motors series and is designed for digital drive controllers. This motor offers a continuous torque at standstill of 9.2 Nm, a nominal speed of 3000 min⁻¹, and is equipped with a 22 Nm blocking brake. It uses digital servo feedback and features a 130 mm centering diameter with a plain shaft and shaft seal.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093A-N-030-N2L-130GA2 is a synchronous servo motor produced by Bosch Rexroth Indramat and listed in the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where it converts drive output into controlled rotary motion for positioning, indexing, or continuous-duty axes in automated equipment. The A length code and 093 frame size indicate a compact form factor suited to medium-torque tasks, while the standard housing and standard balancing support direct machine mounting without added vibration measures. Its synchronous design supports accurate response in machines that rely on repeatable starts, stops, and controlled speed changes.
Its continuous standstill torque is 9.2 Nm, which indicates the steady holding or low-speed output available without thermally overloading the windings. Under rated excitation, the rotor can reach a nominal speed of 3000 rpm, giving the drive a predictable operating speed over a wide range. A blocking brake at the non-drive end supplies up to 22 Nm of static torque, helping hold vertical or suspended loads when power is removed. Mechanical alignment is supported by a 130 mm centering diameter that helps seat the flange accurately against adjoining machinery. Position feedback is provided through digital servo feedback (DSF), allowing closed-loop control of position, speed, and phase.
Electrical and feedback cables exit on Side A through a keyed Connector, keeping both connections at the same end of the housing. The motor uses a smooth plain shaft to transmit torque to couplings or pulleys, and a shaft seal helps limit the ingress of coolant or lubricants at the output journal. The shaft arrangement is single-ended, which suits common coupling layouts in servo-driven machinery. This layout keeps the driven end clear for mechanical integration and groups the cable outlet away from the load side of the motor. It also separates the wiring area from the mechanical output area, which is useful where surrounding components leave limited clearance.
Frequently Asked Questions about MDD093A-N-030-N2L-130GA2:
Q: What is the continuous standstill torque of the MDD093A-N-030-N2L-130GA2 motor?
A: The MDD093A-N-030-N2L-130GA2 motor provides a continuous torque of 9.2 Nm at standstill.
Q: What type of feedback system is included with the MDD093A-N-030-N2L-130GA2 motor?
A: This motor uses digital servo feedback (DSF) for accurate position monitoring.
Q: Does the MDD093A-N-030-N2L-130GA2 motor have a holding brake, and what is its torque rating?
A: A blocking brake with a torque of 22 Nm is included on this model.
Q: What is the nominal speed of the MDD093A-N-030-N2L-130GA2 motor?
A: The nominal speed for this motor is 3000 min⁻¹.
Q: What shaft type and sealing features does the MDD093A-N-030-N2L-130GA2 motor have?
A: This model is equipped with a plain shaft and includes a shaft seal for added protection.
