MDD093A-N-030-N2L-130GA1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911259132
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
44 Seconds
The Bosch Rexroth Indramat MDD093A-N-030-N2L-130GA1 is a synchronous motor from the MDD Synchronous Motors series designed for digital drive controllers. It has a nominal speed of 3000 per minute, a continuous torque at standstill of 9.2 Nm, and features a holding brake with 11 Nm of torque. The motor includes digital servo feedback and a 130 mm centering diameter.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Bosch Rexroth Indramat MDD093A-N-030-N2L-130GA1 is a permanent-magnet synchronous servo motor in the MDD Synchronous Motors series. Designed for operation with digital drive controllers, it converts commanded current into controlled rotary motion for positioning tables, gantry axes, or packaging spindles. The unit supplies feedback to its drive so positioning loops remain closed in real time, making it a common choice for mid-power automation where speed accuracy and compact size are required. Its compact motor format suits machines that need precise motion control without adding unnecessary installation complexity.
The mechanical interface is centered by a 130 mm pilot diameter that locates the housing accurately during mounting, and the motor uses standard balancing to limit residual vibration. A nominal speed of 3000 rpm allows direct coupling to gearless loads driven by 50/60 Hz inverters. Continuous torque at standstill is 9.2 Nm, allowing the shaft to hold static loads while the windings remain within thermal limits. For powered-off retention, the integrated blocking brake provides 11 Nm of holding torque. Wiring exits on Side A through a sealed industrial connector, which helps keep cable routing orderly in compact cabinets. Position data is transmitted through digital servo feedback (DSF), allowing the controller to monitor rotor position for closed-loop motion control.
The motor uses frame code 093 with motor length code A, which keeps the housing short for space-limited multi-axis layouts. It has a plain shaft, so torque is transferred through a suitable coupling rather than a keyed connection. A shaft seal helps keep contaminants out of the motor interior while supporting clean integration with adjacent mechanical components. The housing is standard, and the connection type uses a single combined power and feedback connector. The shaft end is provided only on the drive side, leaving side B open for surrounding machine hardware such as a coupling guard or other external components.
Frequently Asked Questions about MDD093A-N-030-N2L-130GA1:
Q: Does the MDD093A-N-030-N2L-130GA1 motor have a holding brake and what is its torque?
A: This motor includes a blocking brake capable of delivering 11 Nm of holding torque.
Q: What type of feedback is integrated in the MDD093A-N-030-N2L-130GA1 motor?
A: The MDD093A-N-030-N2L-130GA1 offers digital servo feedback for precise motor control.
Q: What is the nominal speed of the MDD093A-N-030-N2L-130GA1?
A: It achieves a nominal speed of 3000 revolutions per minute.
Q: What is the shaft type used in the MDD093A-N-030-N2L-130GA1 motor?
A: The shaft is configured as a plain shaft and includes a shaft seal.
Q: Where is the electrical connection situated on the MDD093A-N-030-N2L-130GA1 and what type is it?
A: The connection is provided via a connector located on Side A of the motor.
