Product Description:

The MDD093A-N-030-N2L-110PR0 is a synchronous AC servo motor produced by Bosch Rexroth Indramat and assigned to the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it supplies closed-loop rotary motion for industrial positioning and velocity tasks inside multi-axis automation systems. The motor works with compatible drive electronics to deliver stable torque and repeatable motion in equipment that requires accurate axis control. Its compact format also makes it suitable for installations where machine space is limited.

This model reaches a nominal speed of 3000 rpm, enabling rapid cycle execution in handling or packaging equipment. At standstill, it sustains 9.2 Nm of continuous torque, allowing the motor to remain loaded during dwell periods without excessive heating. A centering diameter of 110 mm helps align the motor with standard mounting flanges and supports accurate shaft positioning. Power and feedback leads exit on the right side, and a compact connector provides the electrical interface. Rotor position is monitored through digital servo feedback, allowing the controller to calculate velocity and correct position error during each control cycle. This feedback arrangement supports smooth motion during frequent acceleration and deceleration.

Mechanical output is provided through a shaft with a keyway, and a shaft seal at the front bearing journal helps limit contamination around the bearing area. The motor is supplied without a blocking brake, so any load that must remain fixed after power is removed needs external holding force. A standard balancing grade helps reduce vibration during operation, while the standard housing supports convection cooling through its ribbed aluminum frame. Size code 093 and length code A give the motor a short overall body that fits confined axis modules. The shaft is present only on the drive side, which reduces the space needed at the rear of the motor.