Product Description:

The MDD093A-N-030-N2L-110PL2 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Supplied for digital drive controllers, the unit converts current commands into precise rotary motion for positioning, indexing, and cyclic tasks in automated machinery. The motor uses size 093 with length code A, which gives compact overall dimensions for medium-inertia axes without sacrificing the stiffness needed for repeatable motion. Because it is intended for closed-loop operation, it fits systems that require smooth speed changes and accurate position correction through repeated cycles. This layout makes the unit suitable for transfer systems, packaging equipment, and other machines that depend on stable acceleration and accurate stopping.

At standstill, the motor delivers a continuous torque of 9.2 Nm. Its rated operating point is a nominal speed of 3000 rpm, which supports direct coupling to common industrial gearboxes and other rotary transmission elements. A built-in blocking brake provides 22 Nm of static holding torque, helping suspended or vertical axes remain in place when power is removed. Position data are returned through digital servo feedback (DSF), allowing the connected drive to monitor rotor position and regulate motion with high accuracy. Precise flange alignment is supported by a centering diameter of 110 mm, and the connector interface routes power and feedback through a compact connection point that helps keep cable runs orderly.

The electrical connector is oriented to the left side, which can simplify cable routing when several axes are mounted close together. Output torque is transferred through a keyway shaft, providing a positive mechanical connection to couplings, pulleys, or gear inputs. The drive end includes a shaft seal, which helps limit the entry of contaminants around the shaft opening during operation. The motor uses a standard configuration without a side B shaft end, so the opposite face remains closed for installations where rear shaft access is not required. This arrangement is useful where the machine frame leaves limited clearance behind the motor body. Rotor balancing and the cast-aluminum housing follow standard execution for this motor type, supporting integration into enclosed machine assemblies.