MDD093A-N-030-N2L-110PL1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD093A-N-030-N2L-110PL1 is a synchronous motor from the MDD Synchronous Motors series designed for use with digital drive controllers. It features a nominal speed of 3000 rpm, has a centering diameter of 110 mm, and provides a continuous torque of 9.2 Nm at standstill. The motor includes a digital servo feedback system, a keyway shaft with seal, and an 11 Nm holding brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093A-N-030-N2L-110PL1 synchronous servomotor is designed by Bosch Rexroth Indramat for the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts regulated drive current into precise rotary motion in automated machines and handling equipment. The unit belongs to motor size 093 and uses the compact length code A housing, giving the machine builder a short axial dimension without changing the standard housing profile. Standard dynamic balancing keeps vibration within normal limits so the motor can mount directly to equipment frames, and the compact body suits installations where adjacent axes leave limited space.
At standstill, the rotor can deliver 9.2 Nm of continuous torque, allowing the drive to support static loads without overheating. During motion, the magnetic design permits operation up to 3000 rpm, matching common inverter operating ranges. A blocking brake is fitted, and its holding capacity of 11 Nm secures vertical axes when power is removed. The centering shoulder diameter of 110 mm aligns the flange to gearboxes or machine plates so that runout stays within tolerance. Power and feedback conductors exit on the left side, which can simplify cable routing in compact machine layouts.
The motor uses a connector interface, so installation does not require hard-wired terminations and the electrical connection remains easy to service. Position data is returned through digital servo feedback (DSF), allowing the drive controller to close a high-resolution speed loop without auxiliary encoders. A sealed front bearing helps protect against dust ingress because the shaft is supplied with a shaft seal, and the single keyway on the standard shaft end simplifies coupling to pulleys or rigid hubs. The housing remains the standard design, and there is no side-B shaft extension, which keeps the overall envelope narrow for inline mounting beside adjacent axes.
Frequently Asked Questions about MDD093A-N-030-N2L-110PL1:
Q: What is the continuous torque at standstill for the MDD093A-N-030-N2L-110PL1 motor?
A: This model provides a continuous torque at standstill of 9.2 Nm, suitable for moderate load applications.
Q: What type of feedback does the MDD093A-N-030-N2L-110PL1 motor use?
A: The MDD093A-N-030-N2L-110PL1 is equipped with a digital servo feedback (DSF) system for motor feedback.
Q: What is the connection direction for the MDD093A-N-030-N2L-110PL1?
A: The connection direction on this motor is to the left, which may influence cabling arrangements.
Q: Does the MDD093A-N-030-N2L-110PL1 motor come with a holding brake?
A: A blocking brake is included, offering a holding brake torque of 11 Nm to secure load positions.
Q: What is the centering diameter of the MDD093A-N-030-N2L-110PL1 motor?
A: This model features a centering diameter of 110 mm, which should be matched during installation.
