Product Description:

The MDD093A-N-030-N2L-110PL0 is a synchronous servo motor built by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is designed for use with digital drive controllers, where commanded current is converted into controlled rotary motion for positioning and speed-regulated axes. This type of motor is commonly used in automated machinery and handling systems that require repeatable motion and stable closed-loop response. Because it is intended for digital control, the drive can continuously correct torque output as load conditions change during operation.

This model provides a continuous standstill torque of 9.2 Nm, which helps an axis hold load at zero speed without unwanted drift. Under rated excitation, it reaches a nominal speed of 3000 rpm, making it suitable for drive systems that need a broad operating range. Position and velocity are returned through digital servo feedback (DSF), allowing the controller to maintain accurate closed-loop regulation during acceleration and deceleration. That feedback arrangement supports stable speed control and repeatable positioning on indexing, feed, and transfer axes. All power and encoder leads exit on the left side, and the 110 mm centering diameter helps align the flange accurately to a gearbox or mounting plate.

The motor is supplied without a blocking brake, so any power-off holding function must be provided by external machine components. Rotor and housing use a standard balancing grade, which supports direct coupling to general industrial machinery without unusual vibration behavior. The 093 frame designation places the motor within a common size class of the series, and a connector style power interface supports straightforward cable attachment while helping reduce electrical interference at the connection point. A keyed shaft transfers torque to the driven load, and the layout is useful where the motor must be mounted close to surrounding machine structures. The mounting arrangement also supports orderly cable routing in compact multi-axis assemblies.