Product Description:

The MDD093A-N-030-N2L-110PB1 synchronous motor is manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Designed for digital drive controllers, it converts inverter output into rotary motion for positioning axes and conveyor sections in automated equipment. The unit follows motor size 093 and length code A, and it uses standard dynamic balancing to support smooth rotation. A factory-mounted blocking brake holds vertical loads during power loss, and the motor layout suits installations where compact mounting and predictable axis holding are important.

At a nominal speed of 3000 rpm, the rotor reaches its rated synchronous speed during normal operation. When locked, the windings can supply 9.2 Nm of continuous standstill torque without exceeding thermal limits. The integrated brake adds 11 Nm of holding torque so static loads remain stationary after power is removed. Mounting accuracy is supported by a flange centering diameter of 110 mm, which helps produce a repeatable fit between the motor and the machine frame. Torque is transmitted through a shaft with a keyway, giving a positive interface with pulleys or couplings during reversing duty cycles and repeated starts.

Electrical terminations are located on side B, and a single locking connector carries both power and signal conductors to reduce wiring bulk and keep the connection area compact. Position data comes from integrated digital servo feedback, enabling high-resolution closed-loop control in compatible Bosch Rexroth drive platforms. The cast body uses a standard housing configuration, and a shaft seal helps block coolant or oil from entering at the journal. This arrangement leaves no second shaft end, which helps conserve space in compact automation cells and keeps the rear motor profile simple.