Product Description:

The MDD093A-N-030-N2L-110PB0 synchronous servo motor is produced by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Designed for digital drive controllers, it converts regulated electrical energy into controlled mechanical torque for automated handling, packaging, and textile stations. Its electromagnetic construction supports dynamic positioning, while the mechanical envelope follows the mounting pattern common to other units in the series for straightforward installation in multi-axis equipment. With an integrated feedback channel, the motor maintains precise speed and position under varying loads, which helps the axis stay stable during repeated start-stop motion.

The motor supplies a continuous standstill torque of 9.2 Nm, providing the holding force needed to keep loads stationary without drift. Under rated excitation, it reaches a nominal speed of 3000 rpm, allowing rapid index moves without exceeding normal operating limits. A centering diameter of 110 mm keeps the flange concentric with adjoining gear stages and supports accurate alignment during assembly. Cables exit on Side B, which can simplify wiring when the unit is mounted near a rear panel, and the electrical interface uses a quick-disconnect connector for secure connection to the drive system.

The motor has a frame size of 093, and the A length keeps total depth low for space-restricted machines. Rotor angle is monitored through digital servo feedback, so the drive can apply high-bandwidth current loops for accurate motion and stable response during changing load conditions. The output shaft uses a keyway, permitting standard keyed couplings to transmit torque without custom hub machining. The assembly is delivered without a blocking brake, so any hold-in-place requirement must be handled by the drive or an external mechanical lock. A shaft seal also helps reduce contamination ingress around the shaft area during normal operation.