Product Description:

The MDD093A-N-030-N2L-110PA1 is an AC synchronous motor engineered by Bosch Rexroth Indramat for inclusion in the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it serves as the rotary actuator within closed-loop automation axes where position, velocity, and torque are regulated by a matching drive. The unit’s electromechanical design enables direct mounting to machinery in packaging, printing, or material-handling lines, letting the controller impose commanded motion profiles without intermediate transmission components or manual recalibration.

Its continuous stall capability of 9.2 Nm is the torque available for holding or slow-speed positioning without thermal overload, while a nominal velocity of 3000 rpm is the speed point for sustained production cycles. Accurate shaft feedback is delivered through Digital servo feedback (DSF), allowing the drive to close position loops within one encoder line. Mechanical alignment is simplified by a centering diameter of 110 mm, and standard balancing helps reduce residual vibration at high speed. Power and encoder conductors exit through a connector on side A, so cabinet cabling can be routed parallel to the machine frame and kept clear of moving parts. The rotor and stator envelope correspond to motor size 093, which suits machinery designed for this frame size.

A factory-mounted blocking brake supplies 11 Nm of static holding torque to secure vertical or indexing loads when power is removed. The shaft has a keyway and a shaft seal to limit lubricant egress and dust ingress at the coupling. Housing construction is standard, and the drivetrain length follows code A, giving the shortest frame in the 093 family. The motor is delivered without a side-B shaft end, which eases sealing demands on adjacent bearings while still allowing straightforward coupling to pulleys or gearboxes.