Product Description:

The MDD093A-N-030-N2L-110GR0 servo motor is manufactured by Bosch Rexroth Indramat and belongs to the MDD Synchronous Motors series. It is used with digital drive controllers and converts controlled three-phase output from the amplifier into rotary motion for axes that require precise speed or position control. A permanent-magnet rotor, laminated stator, and integrated feedback elements support responsive motion in material handling systems, packaging machines, and other compact automation equipment. This operating principle allows the paired drive to regulate acceleration, speed stability, and positioning with the consistency required in automated production equipment. The compact housing supports installation in machines where mounting space is limited but repeatable motion is still required.

Its mechanical interface uses a centering shoulder of 110 mm, which provides the pilot diameter for flange mounting and helps maintain coaxial alignment with the driven machine. Power and feedback cables exit on the right side, which can simplify routing where multiple axes are installed close together. The motor uses a plug-style connector, so the cable set can be detached without opening the housing. This layout keeps the electrical connection outside the main housing cavity and supports straightforward cable routing near the motor flange. Under continuous stall conditions it delivers 9.2 Nm of torque, and during normal operation the rotor can reach 3000 rpm for rapid indexing and short cycle times. The available stall torque helps the axis resist load disturbances when the commanded current is maintained by the drive.

Position data is generated through digital servo feedback, giving the drive controller precise signals for current, velocity, and position loops. The motor is supplied without a blocking brake, so any holding function must be provided externally when the axis is at rest. That arrangement lowers rotor inertia and suits axes that use external holding methods when power is removed. It uses standard balancing to support smooth running across the speed range. The motor has size 093, and its plain shaft with a radial shaft seal helps protect the bearings from airborne contaminants while limiting lubricant loss.