Product Description:

The MDD093A-N-030-N2L-110GL1 is a synchronous AC servo motor built by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended for use with digital drive controllers and converts electrical energy into rotary motion in industrial automation lines. Its integrated encoder returns position data to the connected inverter, allowing accurate closed-loop control during positioning and speed regulation. This makes the motor suitable for axes that require repeatable response during start, stop, and hold conditions.

This unit produces a continuous standstill torque of 9.2 Nm, indicating the sustained load it can hold without overheating when stalled. During normal operation it can reach a nominal mechanical speed of 3000 rpm, which suits high-cycle packaging or handling equipment. The rotor is centered by a 110 mm pilot to simplify alignment with gearboxes and couplings. All power and feedback connections exit on the left side through a sealed connector, which can simplify cable routing when motors are mounted in parallel rows. Position data is transmitted through digital servo feedback, allowing the drive to resolve fine increments without a separate tachometer. Standard dynamic balancing helps limit vibration, and the housing uses a normal convection-cooled design.

A blocking brake provides 11 Nm of static holding torque, so vertical axes can remain stationary when power is removed. The motor uses a plain shaft for clamped couplings, and a shaft seal protects the bearing cavity from coolant spray. Size code 093 identifies the stator diameter, while length code A keeps the overall depth short for compact Z-axis carriages. The motor also has a standard housing finish, a connector-style power interface, and no B-side shaft end. That arrangement supports compact machine layouts where rear shaft access is not required.