Product Description:

The MDD093A-N-030-N2L-110GL0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it pairs with Rexroth inverters to deliver closed-loop motion in packaging lines, material-handling axes, and other automated stations. The motor follows the 093 frame size with the compact A length code, and it uses the standard housing arrangement to fit directly onto machine frames without special adapters. Its purpose inside an automation cell is to transform commanded electrical power into controlled rotary motion for precise positioning and velocity control.

Its rated mechanical performance centers on a nominal speed of 3000 rpm, allowing the drive to reach common servo spindle velocities while staying synchronous to the control frequency. At standstill, the motor can supply 9.2 Nm of continuous torque, supporting static load holding and low-speed process forces before thermal limits are reached. A centering diameter of 110 mm aligns the flange to the adjoining machine plate and preserves concentricity during high-speed cycles. Rotor position is returned to the amplifier through digital servo feedback, so the controller can adjust current during each control period for precise torque. Motion is transferred through a plain shaft, reducing component count where keyed couplings are not required.

Electrical terminations use a molded connector oriented to the left, keeping cable runs clear of adjacent modules. The rotor uses standard balancing, so additional counterweights are unnecessary across the normal operating range. A shaft seal is installed at the output end to help exclude oil mist or coolant, and the shaft end follows the standard design without a side-B extension. Because the unit is supplied without a holding brake, power-off retention torque must be provided by the drive or by an external mechanical lock.